Start with the booster's job before you wash it
The Ruskovilla Wool Nappy Booster is a three-layer wool insert sized approximately 32x12 cm (about 12.5 by 4.75 inches). It is designed to sit outside the absorbent inner diaper but inside the wool cover, adding wool layers in the wet zone without bulk elsewhere. Because it works next to the cover rather than next to the baby, its care routine is about protecting the wool's structure and natural lanolin, not about heavy soiling.
That placement matters for washing. The booster is not a liner and is too thick to act as one, so it should not be expected to catch solids. Most of the time, airing is enough between washes.
A hand-wash routine that respects the wool
The manufacturer recommends hand washing. If you use a machine, the supplied guidance allows a hand-wash or wool program with a 30 degree C setting, but hand washing gives you the most control over agitation and temperature.
- Check the label first: The booster is made of 100% certified organic merino wool and contains no dyes. Use a wool-safe wash rather than a standard detergent.
- Prewash only if you want extra absorbency: The general Ruskovilla care information says no washing is required before first use, but the booster page specifically suggests hand washing before first use to improve absorbency. Follow the booster-specific note if absorbency is your goal.
- Wash by hand in cool water: Use a wool wash such as Sonett's wool and silk washing liquid. Gently squeeze the water through the wool; do not rub, wring or twist.
- Rinse and reshape: Rinse in water of the same temperature, then smooth the booster into shape while it is wet so it dries flat and even.
Lanolizing: when and how to add it back
Wool covers rely on lanolin for water resistance, and the booster is made from the same wool material as Ruskovilla's nappy pants and shorts. The supplied product information does not include a specific lanolin ratio or soaking time for this booster, so do not invent one. If you lanolize your wool covers, use the same lanolin product and method you already trust for those covers, and treat the booster the same way. If you are new to lanolizing, follow the instructions on your lanolin product rather than guessing a dose.
A practical checkpoint: if the booster feels stiff or less soft after washing, a lanolin treatment can help restore the wool's feel. If it still feels soft and works as expected, you can skip lanolizing that cycle.
Drying without heat or direct sun
The supplied care information is clear: do not air or dry the booster in direct sunlight or near a heating source. Heat and strong sun can damage wool fibers. Instead, lay the booster flat and smooth it into shape in a shaded, well-ventilated spot. Avoid hanging it by one corner, which can stretch the wool out of shape.
Wool is a slow absorber, so the booster may feel damp longer than a cotton insert. Give it time to dry fully before returning it to the cover. A second booster in the pack lets you rotate while one dries.
Booster details that affect care
- Ruskovilla Wool Nappy Booster: Three layers of 100% certified organic merino wool, sized approximately 32x12 cm (about 12.5 by 4.75 inches). The three-layer construction is what adds wool coverage in the wet zone, and the size tells you how much surface area you are caring for.

Ruskovilla Wool Nappy Booster - Ruskovilla Wool Nappy Booster: Sold as a pack of two boosters. Having two lets you wash one while the other is in use, which matters because wool takes longer to dry.
- Ruskovilla Wool Nappy Booster: Contains no dyes and no mothproofing; store in an air-tight plastic bag. Dye-free wool is gentler, and the mothproofing note tells you how to protect the booster in storage.
Storing the booster between uses
Airing reduces the need for washing, so after a day's use, let the booster air out in a dry, shaded place before putting it away. When you store it for longer periods, the supplied guidance says to keep it in an air-tight plastic bag because the wool contains no mothproofing. Make sure the booster is completely dry before sealing it in a bag.
What to skip
Avoid fabric softener, bleach and hot water, which are not part of the supplied care instructions and can harm wool. Do not dry the booster on a radiator or in direct sun. And do not treat the booster as a liner: it is too thick for that job and is meant to sit next to the cover, not next to the baby.

